Description
The Auto Ranging Digital Conductivity / TDS Meter is designed to eliminate operational difficulties in conductivity measurements. The solid state circuitry provides auto selection of ranges in seven steps and digital display of measured conductivity & cell constant. The novel feature of cell constant adjustment upto 3½ digits eliminates possibility of any error due to incorrect cell constant compensation. The capacitive & polarization effects are minimized by automatic selection of 200 Hz or 3 KHz frequency. Output for potentiometric recorder is available.
| SPECIFICATION | |
|---|---|
| Parameter | Digital Conductivity Meter |
| Range selection | Automatic / Manual |
| Range auto selection | 0 to 1999 milliS/cm |
| Read out | 3½ digit display with auto dot selection as per range selected |
| Accuracy | ±0.5% of full scale |
| Test frequency | 200 Hz or 3 KHz selected automatically to get optimum reading |
| Indications | Direct digital readout specific conductance in µS/cm or mS/cm on a 3½ |
| Cell constant | Adjustable between 0.001 to 1.999 |
| Recorder output | 1.999 Volts F.S.D |
| 6 TDS range | 0 to 1.32 × 10 ppm |
| Dimensions | 260 × 280 × 65 mm |
| Weight | 1.7 Kg |
| Power requirement | 230V AC ±10% 50 Hz |
| Standard supply | Basic unit, dust cover & operation manual |
| Essential accessory | Conductivity Cell of constants K= 1 or 0.1, at an extra cost |